Take It Apart And Look At The End Of The Pipe, Make Sure There Are No Cracks In That Formed Bell That Fits Into The Other Pipe.
I have used fernco p traps for years with good results. Pipe putty is designed to harden at room temperature and seal the hole or crack. Start date oct 3, 2018;
The Beveled Side Of The Washers Should Face The Trap Bend.
In the trades messages 1,476 reaction score 343 points 83 location billings, montana. Open the jaws of the pliers wide enough to grip the coupling nut. Oct 3, 2018 #1 i removed the p trap and pipe from the old kitchen and tried to reuse it for the.
It's Very Possible That The Female Plastic Threaded Cap Has Damage To The Threads And Won't Seal.
Tighten the nut by turning it clockwise. When you tighten it down the inner gasket will seal around the drain and prevent water and odor from escaping. Attach the trap bend to the trap arm, using slip nuts and washers.
The New Abs P Trap Is Leaking A Little Bit At The Threads Where The Two Pieces Of The Trap Join.
Drain pipe p trap leaking under sink. Normally they are fitted and tested for. It traps potential drain clogs preventing them from clogging the drainpipe farther away, and also creates a water barrier.
Replace It With An Identical One.
Pull the plastic collar off of the end of the male pipe. It should fit over your 1 1/2 inch drain pipe going into the wall stub. Tighten all the nuts with a pair of slip joint pliers.